Dynam Focke Wulf FW-190 1270mm (50") Wingspan - PNP
This product is discontinued
Spare parts available below
Quick links
Dynam Focke Wulf FW-190 1270mm (50") Wingspan - PNP - DY8949PNP
The Focke-Wulf Fw 190 Wrger (English: Shrike) was a German single-seat, single-engine fighter aircraft designed by Kurt Tank in the late 1930s and widely used during World War II. Powered by a radial engine in most versions, the Fw 190 had ample power and was able to lift larger loads than its well-known counterpart, the Messerschmitt Bf 109. The Fw 190 was used by the Luftwaffe in a wide variety of roles, including day fighter, fighter-bomber, ground-attack aircraft and, to a lesser degree, night fighter. When the Fw 190 started flying operationally over France in August 1941, it quickly proved itself to be superior in all but turn radius to the Royal Air Force's main front-line fighter, the Spitfire Mk. V, especially at low and medium altitudes. The 190 maintained superiority over Allied fighters until the introduction of the improved Spitfire Mk. IX in July 1942. Dynam's FW-190 PNP is virtually ready for those ambitious sorties! All you need is a 5 channel radio, 5 channel receiver and 4S 14.8V 2500-3000 mAh Li-Po battery and you're ready for those Spitfires and other Allied fighters!
Features:
- NEW! Tomcat Skylord 40 Amp ESC with XT60 connector
- NEW! LED navigation lighting with LED control board (no more bare leads)
- Realistic scale features including WWII German Luftwaffe paint scheme, hand painted pilot figure, gun turrets, and molded panel lines
- Servoless electronic retractable landing gear
- Powerful BM3720A-KV500 Brushless Outrunner motor
- Scale 3-Blade propeller
Includes:
- Dynam Focke Wulf FW-190 1270mm (50") Wingspan - Receiver Ready
- ESC with XT60 connector, servos, motor and electronic retractable landing gear come pre-installed for your convenience
- Decal set
Requires:
- 5 Channel Radio - Select a minimum 5 channel radio from our Radio Collection
- 5 Channel Receiver - Select a minimum 5 channel receiver from our Receiver Collection
- 4 Cell 14.8V 2500-3600 mAh LiPo Battery with XT60 connector - We recommend the Admiral 3000mAh 4S LiPo Battery with XT60 Connector
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
Product Specifications:
Wingspan | 1270mm / 50in |
Length | 1110mm / 43.7in |
Flying Weight | 1450g / 51.1oz |
CG (Center of Gravity) | 70 - 75mm from the leading edge at the wing root |
Power System | BM3720A-KV500 Brushless Outrunner Motor |
Electronic Speed Control | 40A Brushless with XT60 connector |
Propeller / EDF | 3-Blade Scale Prop |
Servos | 4x 9g standard |
Landing Gear | Retractable |
Required Battery | 4S 14.8V 2500mAh - 3600mAh 25C LiPo (required) |
Required Radio | 5 Channel (required) |
Ailerons | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Lights | Yes |
Hinge Type | Foam |
Material | EPO Foam |
Skill Level | Intermediate |
Build Time | 2-3 Hours |
Recommended Environment | Outdoor |
Product Videos
Product Questions & Answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.Product Support
Product Manuals:
Product Updates:
- April 6, 2014 - The rudder is now painted yellow.
If you need any additional assistance, please visit the Motion RC Help Center