Dynam 310 Grand Cruiser V1 1280mm (50") Wingspan - PNP - (OPEN BOX)
Dynam 310 Grand Cruiser V1 1280mm (50") Wingspan - OPEN BOX
- Product condition: Factory New
- Box condition: Good
- Missing parts: None
- Damage/defects: THIS IS THE OLD V1 VERSION. This plane is completely new aside from the fact it is the older version of the model. It differs from the V2 in the following ways:
- ESC's: Detrum 30amp with T connector
- NO flaps or flap servos
- LED's have bare leads
- No LED control board
- Older version of retracts without SMT soldered circuit board
- Motors: Detrum BM2815A3-KV1100
This is the new and improved version (V2) of the popular Dynam 310 Grand Cruiser. This new version now includes Tomcat Skylord 30 Amp ESCs, pre-installed flaps, pre-installed flap servos, LED lights with pre-soldered connector ends, LED light controller for static and flashing operations, and redesigned long-life electronic retracts. Dynam's Grand Cruiser PNP is extremely fun and easy to fly. It is virtually ready for the sky! All you need is a 6 channel radio, 6 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready for takeoff from your favorite runway.
Visit the Official Dynam Grand Cruiser Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- NEW! Tomcat Skylord 30 Amp ESCs with XT60 connector
- NEW! Completely redesigned electronic retracts with new SMT soldered circuit board and long-life drive system for improved reliability and durability
- NEW! Flaps and flap servos are now pre-installed and fully operational
- NEW! LED navigation lighting with LED control board (no more bare leads)
- Realistic scale features including attractive 310 paint scheme and molded panel lines
- Two powerful M2815A-KV1100 brushless motors
Includes:
- Dynam 310 Grand Cruiser V2 1280mm (50") Wingspan - Receiver Ready
- ESCs with XT60 connector, servos, motors, flaps and electronic retractable landing gear come pre-installed for your convenience
- Decal set (unapplied)
Requires:
- 6 Channel Radio - Select a minimum 6 channel radio from our Radio Collection
- 6 Channel Receiver - Select a minimum 6 channel receiver from our Receiver Collection
- 3 Cell 11.1V 2200 mAh LiPo Battery with XT60 connector - EPR22003X6
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
Tech Note: The spinners for the model are no longer chrome, but are painted silver. The kit includes additional decals beyond what is shown in our product photos.
Product Specifications:
Wingspan | 1280mm / 50in |
Length | 1100mm / 43.3in |
Flying Weight | 1200g / 42.32oz |
CG (Center of Gravity) | 55 - 65mm from the leading edge at the wing root |
Power System | 2x M2815A-KV1100 Motors |
Electronic Speed Control | 2x 30A Brushless with XT60 connector |
Propeller / EDF | 2x 3 blade propeller |
Servos | 4x 9g standard |
Landing Gear | Retractable |
Required Battery | 3S 11.1V 2200mAh 30C LiPo (required) |
Required Radio | 6 Channel (required) |
Ailerons | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | Yes |
Lights | Yes |
Hinge Type | Foam |
Material | EPO Foam |
Skill Level | Intermediate |
Build Time | 2 Hours |
Recommended Environment | Outdoor |