Detrum iStone DSM and S-Bus Compatible 6-AXIS Airplane Stabilizer
iStone DSM and S-Bus Compatible 6-AXIS Airplane Stabilizer from Detrum - DY-DTM-G003
The Detrum iStone DSM and S-Bus 6-AXIS Airplane Stabilizer with ABS system is a great addition to the growing class of gyros. Change flight modes quickly and with ease by switching channels during your flight. Supports standard, flying wing and V-tail model aircraft. With the Auto Balance System, restoring your model that got away from you is as easy as the flick of a switch on your radio. Easy to program, the Detrum iStone DSM 6-AXIS offers three primary flight modes:
Gyro Off - Turn your gyro on or off at the flick of a switch.
Normal Mode - Standard gyro setting, stabilizes your aircraft.
Aerobatic Mode - Holds and maintains your aircraft at a given altitude.
Auto Balance - Restore your aircraft to straight-and-level flight with the flick of a switch.
With the Detrum iStone DSM and S-Bus 6-AXIS Airplane Stabilizer with ABS system you have a high performance gyro that is easy to program, easy to use, easy to mount and easy to enjoy!
- 32-bit high-performance ARM MCU, 6-axis sensor chipset
- Original attitude stabilization algorithm and control algorithm
- Supports normal wing, flying wing, and V-tail airplanes
- Supports mode switch via MODE channel, can switch between different modes
- Four flight modes: Gyro Off Mode, Normal Mode, Aerobatic Mode, and Auto-balance (Safe) Mode
- Set the programmable items (aileron/roll/rudder gain, level offset, flight mode, etc.) via 3-in-1 program card (not included)
- Supports DSM, S.BUS and PWM receivers
- Compact size, supporting different mounting directions (face up, down, left, and right)
- Auto-balance (Safe) Mode to restore aircraft to straight-and-level flight
- Detrum iStone DSM and S-Bus Compatible 6-AXIS Airplane Stabilizer
- 3-signal wire
- 2 pieces of anti-shock double sided tape
- 2 Single-signal wires
- Detrum 3-in-1 Programming Card for iStone Stabilizers and Tomcat ESCs - DY-DTM-1002
- Main Controller: 32-bit MCU
- Sensor: 6-axis gyro
- Gyro Scale Range: -2000dps ~ +2000dps
- Accelerometer Scale Range: -4g ~ +4g
- Input Signal: PWM, Futaba S.BUS, DSM
- Output Signal: PWM (71.4Hz)
- Input Voltage: 4.8V ~ 7.4V
- Operating Temp: -20℃ ~ 70℃
- Size: 36.5mm*29.4mm*12.6mm
- Weight: 10g